|
3 link
Oct 3, 2017 4:37:21 GMT -6
via mobile
Post by sandsracing on Oct 3, 2017 4:37:21 GMT -6
I run a dirt 3 link car with metric clip. Ran this car for 2 years and still has a push issue. I can throw the car in side ways and it's ok but as far as driving it in the turns it will push straight up the track. Even running it around my yard I almost have to come to a complete stop so it will turn. 3100lbs left trailing arm 16deg right 5deg pull bar 19deg springs fl800 fr900 lr225 rr175 camber left 4deg right - Caster left 3deg right 7deg. Also was thinking about going with 3 piece spindles what would 8deg pin inclination do
|
|
|
3 link
Oct 27, 2017 12:30:37 GMT -6
Post by moldy on Oct 27, 2017 12:30:37 GMT -6
You didn't tell about the wheel base. Could the right be shorter than the left? It ( right side ) usually is about an 1/8th of an inch longer than the left. Measure and be sure. That's my suggestion, I stick to the stock classes of cars. I dont want to mess up somebodies chassis, or get into a pissin match with some body. Moldy
|
|
|
3 link
Nov 19, 2017 22:15:01 GMT -6
via mobile
Post by emptiness777 on Nov 19, 2017 22:15:01 GMT -6
Do you have the same problem turning both ways? I would check the steering. Check your pitman and idler if you’re using a steering box. Make sure they’re working on the same arc together.
|
|