|
Post by luke12 on May 6, 2018 7:04:21 GMT -6
After putting in a new rear end, the setup has just not been the same. Birdcages have been placed back in the same location as old setup and all bars are in same location. Only difference has been a motor upgrade (probably 75hp). In the past the car has handled great, now, no matter how I approach corner entry, halfway through the turn it pushes awful. Any advice on what to do to loosen up the car through center?
|
|
|
Post by luke12 on May 6, 2018 7:08:11 GMT -6
To further explain the setup. The left side has the two forward bars, the right side has the top bar going back and the lower bar going forward. Up until putting in the new motor, handling has never been an issue
|
|