|
Post by racer2112 on Apr 8, 2013 13:57:39 GMT -6
Pickin up an old mustang two ministock this week. Any setup advice for it?
|
|
|
Post by flipflopoo1oo on Mar 7, 2014 21:49:41 GMT -6
Check out my other post! They still turn the same way and variations apply by poundage! Built a few that lapped the field! One inch or less rollout down to 1/4" on dry-slick! This change tightens set up as well! Adjustable cam gear is a must to tune! I f 2 brl holley ,jets have to be different to inner cylinders to feed properly by manifold design! The most caster (to the rear on top) you can get with neg 1-2 lt and pos 3-4 rt. Stronger rt ft spring with 50-100 split! 25 split left rear stronger! Spring weights as to total weight and percentages ft to rear!
|
|