|
Post by matts870 on Aug 26, 2015 22:45:12 GMT -6
Ran into this before but don't remember the fix. Bought new front Afco rotors to change to 5x5 bolt pattern and the rotor won't tighten down. With the spindle nut tight there is still slack in the rotor. The snout on the Afco rotors is longer than the rotors I had on before. I also noticed the spindle had an X stamped on it. Could that be an S-10 spindle or something that's why it's a shorter length?
|
|
|
Post by street16 on Feb 29, 2016 10:28:13 GMT -6
There are two different spindle and rotor sets for the metrics. You cannot mix them. I don't know if an S-10 uses one or both of these.
|
|