|
Post by matts870 on Aug 26, 2015 23:47:53 GMT -6
Ran into this before but don't remember the fix. Bought new front Afco rotors to change to 5x5 bolt pattern and the rotor won't tighten down. With the spindle nut tight there is still slack in the rotor. The snout on the Afco rotors is longer than the rotors I had on before. I also noticed the spindle had an X stamped on it. Could that be an S-10 spindle or something that's why it's a shorter length?
|
|
|
Post by kbracing on Jan 28, 2016 18:27:24 GMT -6
not sure if it is because its for an s10 but a spindle for an 85 monte carlo will fit the afco rotor (has the longer shaft)
|
|
|
Post by richard89d on Apr 17, 2016 7:28:18 GMT -6
you might have a spindle off a 78-79 metric car they have a shorter shaft on spindle. 80 up has a longer one witch is what most a/m parts replace
|
|