|
Post by jbgold on Jul 20, 2017 9:20:14 GMT -6
How to hook up an HEi distributor Vacuum line to part time vacuum port when the carburetor doesn't have a port?
|
|
|
Post by flipflop on Jul 29, 2017 10:36:52 GMT -6
Live vacuum at intake is fine as to advancing at idle only!!! This alows you to rid use of the power valve and jet to tune for a richer mixture to run cooler to gain horses or detune in the corner!!!
|
|
|
Post by moldy on Nov 23, 2017 17:15:07 GMT -6
Weld the distributor at full advance. Depending on heads vortec, 34*at 3000RPM Stock emission heads: 993, 882, 487 ect 36* at 3000RPM Read the plugs and find the 'heat band on the plug ground. It will tell you whether you need more or less timing. Pump it twice, crank the engine, THEN turn on the ignition switch. BANG you're running.
|
|