|
Post by wildman69 on Apr 15, 2013 19:18:20 GMT -6
looking for any idea why we keep blowing tire off of bead in right front we run around twenty five pounds it is in a fwd car think it might be because we had too aggressive of a tread ? heard about running tube in it. just looking for ideas seems to happen when we run snow tires.
|
|
|
Post by leaf4life on Apr 15, 2013 22:29:36 GMT -6
tubes definately help in that respect. mabey your tire is folding under car so hard that it pops bead? like as if your losing camber entering corner. are you using some kind of lube other than soapy water to seat bead? do you use racing wheels or can you? mabey wheel is meant for 14 in tires and you have 15 in? just possibilities...
|
|
|
Post by wildman69 on Apr 17, 2013 19:54:57 GMT -6
tire is most likely folding under am running stock rim no special lube just whatever tire barn puts on there we have plenty of camber and run spring rubbers in front right very little roll in car. do racing wheels have a bigger area for bead to set ? not allowed to run bead locks
|
|
|
Post by leaf4life on Apr 18, 2013 19:22:30 GMT -6
Yeah, racing wheels do have a bigger hump around bead to help keep them on
|
|
|
Post by flipflopoo1oo on Mar 7, 2014 21:29:08 GMT -6
Not enough steer in the rear is loading the front, toe it out 3/8" and lift the rear!
|
|
|
Post by daytona52 on Jul 23, 2019 17:17:36 GMT -6
Yeah, racing wheels do have a bigger hump around bead to help keep them on They have a bigger lip but they are also more expensive. We have had 3 of them ruined beyond repair in two weeks to the tune of $600 between the rims and tires and a 4th one wrecked 5 weeks ago. One of the two we lost Saturday night only made it 7 laps before it was junk.
|
|
rickd39
Fourth Place
www.duricaracing.com
Posts: 54
|
Post by rickd39 on Jul 24, 2019 13:17:00 GMT -6
I would put a tube in the R/F, most FWD mini stocks on seem to push like crazy
|
|