|
Post by tom00 on Apr 14, 2015 4:29:12 GMT -6
Can anybody provide any help with the older LG, Loose Gruff setup? I have ser# 651 and did not purchase new so trying to get support for this car is a challenge. It is a swing arm with 9" rear. I think I have 900# springs on front, 250 LR and 450 or 600 RR any help would be appreciated. I do not know the suggested ride height or anything?
|
|
|
Post by flipflopoo1oo on Apr 15, 2015 4:41:30 GMT -6
Don't know the chassis but if swing arm on the right instead of left and both fronts the same with no split, I can see the problems in getting there! Most any chassis has a do-able set-up but if your looking for a winning one as we used to win Sat. night , you may want to read more of my post and give it a total make-over as others have gone from 10-11 place and DISSUSTED every race to winning more than not! Its not that hard to do if you just use what God gave you instead of doing as most do buy ( I SPELLED THAT RIGHT DIDN'T I!!! ) Following The Leader!!! Front split suggested to get cross easily 100-200 lbs. Swing arm on left side! Stop nosing and hiking and kick some as anywhere on the track you please!!! Just message if needing more help-- but it's all been posted--- run a few searches with different wording of needs!!
|
|
|
Post by tom00 on Apr 15, 2015 8:38:32 GMT -6
It's an older LG by Jimmy Owens. Try getting in touch with Owens? Right! I know the LG2 has just been manufactured recently, so I know there is some movement out there, was hoping to at least get ride height, 11 , 11 1/2 for my older LG , just would like to know for sure. Swing arm both sides.
|
|
hd
Pit Crew
Posts: 6
|
Post by hd on Apr 25, 2015 21:20:47 GMT -6
LF 750 RF 900 Lr and RR 350 level rear trailing arms in top holes. Not sure on fronts, but level the inner a frame bolts thru the crossmember with the bottom of the balljoint ring where the lower balljoint meets the a frame. Panhard bar 1 1/2 above pinion on 9" , with 2 to 3 inches rake higher on frame.Swing arms 2nd hole from bottom on frame. 130 lbs bite with driver. 54.5% left and 58 rear with 20 gals.Should get you in the ballpark
|
|
|
Post by tom00 on May 5, 2015 10:40:33 GMT -6
Thanks for your help sir, it is much appreciated!
|
|
|
Post by stainedinclay on Sept 2, 2015 17:08:28 GMT -6
I need any info possible on ride nights on a loose gruff chassis #10 thanks.
|
|
|
Post by flipflopoo1oo on Sept 7, 2015 6:55:22 GMT -6
Not knowing one from the other, I treat all as the same as to pounds and angles by logic alone -- so do some reading and run searches in all classes to get a understanding of it all and make the changes as to improving by educating your self to simplify your strugle! All has been posted time after time! Ask all you need once up on post!
|
|
|
Post by bbaldridge14 on Mar 31, 2016 17:06:29 GMT -6
Does anyone know what year a lg chassis with the number ser number 43 would be and where is the typical location for the serial number trying to see if it really is a lg before I buy and what year
|
|