Post by dirtracer07x on Nov 10, 2015 14:31:15 GMT -6
Ok guys need a little help .
thinking about going from USRA Bmod to IMCA Amod and have any engine question.
current motor
350 4 bolt , 40 over, 0 deck,stock crank, pm rods with arp bolts, KB flat tops, balanced, prc 108 cam, 882 heads , performer intake, and keith dorton 4412, 50/50 race fuel.
this is a standard bmod motor and pulls good to about 7k which is what i chipped it at. any est on this hp?
now because of local track changes i am thinking about going to Imca Amod with these changes:
standard vortec heads with maching for new springs and 600 lift springs, performer rpm intake and a 650 or 750 carb. Still would limit rpm to 7k.
what hp would this new combo make? and would the performer rpm be the right intake or should i victor jr?
thinking about going from USRA Bmod to IMCA Amod and have any engine question.
current motor
350 4 bolt , 40 over, 0 deck,stock crank, pm rods with arp bolts, KB flat tops, balanced, prc 108 cam, 882 heads , performer intake, and keith dorton 4412, 50/50 race fuel.
this is a standard bmod motor and pulls good to about 7k which is what i chipped it at. any est on this hp?
now because of local track changes i am thinking about going to Imca Amod with these changes:
standard vortec heads with maching for new springs and 600 lift springs, performer rpm intake and a 650 or 750 carb. Still would limit rpm to 7k.
what hp would this new combo make? and would the performer rpm be the right intake or should i victor jr?