|
Post by racerguy500 on Oct 29, 2021 17:48:25 GMT -6
I need help. I put a powerglide in my race car. It worked at first and kicked right into reverse and would pull forward. It was a little low on fluid so it slipped slightly in forward gears. The servo cover was leaking so I replaced the o-ring and gasket and added fluid. And now it won't move at all. You can barely feel it rocking when I rev it up but won't move. New filter and gasket at first and then again when it wouldn't move. No metal in the pan at all. Any thoughts?
|
|