|
Post by younggun on Jul 5, 2015 16:41:00 GMT -6
Oh so i ran this weekend and the track was incredibly slick and though i had the car to win (most of the super fast cars were gone) but i had 2 problems. The car wanted to back out of the corners as the back tried to come around the front. In the heat race i had both bars the same at 11* with the pan hard bar at 4.5 inches and the car wouldn't turn off or on the bar. It developed a big push right in the middle and broke the tires loose coming off. In the main i raised the lr to 17* and lowered the pan hard bar to 3.5" and the car was a rocket on the bottom but the rear end tried to beat the front end down the straight and blew both back tires off of it.
Here is our full setup: Springs:LF 500 RF 550 LR 175 RR200 the LF carries 30lbs more than RF, W/O driver 90 lbs LR bite 56.1% Rear 52.4% Left 51.9% Cross It also has your 1 1/2 inch lower on LF with driver and 1/2 lower LR with driver ride heights in it.
The main thing i noticed through the corner is i couldn't get any side bite to be able to run through the corner harder, then i lost bite coming out as well.
|
|