|
|
Post by dirtspider53 on Feb 19, 2013 15:14:40 GMT -6
WANT TO CHANGE FRONT ROTORS TO 5 ON 5 WHAT ROTORS AND BEARINGS COULD I USE PART # FOR BEARINGS AND YR MAKE AND MODEL FOR ROTORS. USING 9 FORD WHAT YR MAKE AND MODEL 5 ON 5 ROTORS TO MAKE DISC BRAKES ON REAR. I AM USING 80 MODEL SPINDLES
|
|
|
|
Post by chris on Feb 21, 2013 20:35:48 GMT -6
You can buy some US Brake rotors to match your spindles or drill your rotors to make them 5 on 5. I think the Cadillac Fleetwood ( 77-92 I think ) with rear wheel drive, have 5 on 5 and have all the same ball joints as your camaro do too. I do know the two wheel drive Astro are 5 on 5, but the low control arm ball joint is bigger. ( K6141 moog ) P/N Camaro's low is ( K6145 moog ) P/N. The 71-76 Impala are the same control are as the camaro but it has the K6341 ball joint in it. Those control arms are hard to find and have spares too. So all i am saying is you could use the Astro spindle and rotor only and the 71-76 Impala low control on your camaro! If you have question you can call me at 816-668-9546 Hope this helps  |
|
|
|
Post by dirtspider53 on Feb 24, 2013 22:52:21 GMT -6
thanks for info im going to look into it. thanks for ur help.if i run into a jam i will call u. thanks agin for ur helpful info.
|
|
