jt33
Pit Crew
Posts: 2
|
Post by jt33 on Apr 22, 2013 12:37:53 GMT -6
car wants to bottom out on right front with a 600 lb spring. its a 3link car any suggestions on what to do.
|
|
|
Post by confused on Apr 22, 2013 16:53:02 GMT -6
Raise the front of the car a little.
|
|
jt33
Pit Crew
Posts: 2
|
Post by jt33 on Apr 23, 2013 8:29:09 GMT -6
Thank you
|
|
|
Post by flipflopoo1oo on Mar 3, 2014 23:04:44 GMT -6
Check the ft. weight as to correct spring rates as to percent and total weight and estimated transfer! Test the spring! Some brands vary and can be new and weak leaving you clueless adjusting for hours! Running a v6 mod until engine was outlawed, we made good use of stronger rates to settle the car on the high side! Even though lighter in both chassis and motor with more rear percent, the amount of drag from all the gear pulled it right on down but it was not as loaded as the left with a 200 split. stronger on the right but loaded on the left to get the instant transfer to the right rear to hold going in with that old school 6-12 caster!
|
|