|
Post by smithmod on Aug 21, 2013 15:11:16 GMT -6
Hey guys!
I have been out of the racing scene for a few years and need a little help remembering the proper fuel pressure for an Alcohol/Methanol System. I espessially need to know how to properly set my regulator and any other tuning tips to get me heading in the right direction.
355c.i. with willy's 750 carb currently on a belt drive pump. Car is falling all over itself when he stands on it, at the green flag and picking up the throttle in the corner. Runs fine down the straight.
Thanks for any help.
|
|
|
Post by gallentineracing on Aug 26, 2013 11:52:36 GMT -6
9-10 psi @wot, what type of regulator do you have
|
|
|
Post by flipflopoo1oo on Mar 4, 2014 10:20:16 GMT -6
Carb should have volume and psi does matter so much but float levels will change as per pressure drop lowers the float levels and can be a problem stumble until pressure raises the float level to flow over and into better. Check the accelerator pump and sprayers as check balls tend to stick on alcohol!
|
|