|
Post by ymehp on May 5, 2014 21:19:41 GMT -6
Hello,
Does anyone have a copy or link to a basic wiring diagram for a sbc 350 in a purestock?
I really just need to know what all runs to the starter solenoid?
|
|
|
Post by flipflopoo1oo on May 6, 2014 5:13:37 GMT -6
Using a jumper on the starter and a extra solenoid or Ford relay to in-gauge the starter is best! Your positive feeds off of the your master switch when on and to ign., lights, and start button! One cable to the starter! One wire to energize relay from starter button! One wire from ign. switch to dist.! One to the gauge lights not from ign. but from master side at relay! A heavy wire used on ign. to maximize voltage getting there! A temp and oil warning lamp recommended besides gauges! If electric gauges, they too should feed from master switch side of relay supply when on!
|
|
|
Post by Krooser on May 16, 2014 21:56:58 GMT -6
|
|